Being rich or poor, we could all use a little moderation in our lives. After all, who wants to fritter money on electricity bills when there are a lot more ways to spend it? Recall your grandmother? The one who contended on wearing a sweater rather than putting on the heat, well she was a sharp lady and we can pick up a few things about the way our prudent ancestors lived.
The first step to save money on your electricity bill is to know how and where you use the electricity in your home. The best part of your electricity is drawn up by major appliances like your dryer, oven, fridge and washer. The best option to reduce electricity bills is adopting solar powered electrical equipment in your homes.
Solar panels are not only good for the environment, but also you can benefit from deliberate savings over the lifetime of your solar panel system. You need to invest only once and get its benefit throughout the life time. Going solar can knock out your electric bill completely or curtail it so dramatically that electricity costs are no longer a serious factor in your budget. Also your savings with solar rely upon a few different factors, like the amount of energy your system produces and how much you consume, but the considerable factor is the rates you would contrarily pay to your utility.
Households that deploy rooftop panels could salvage up to 95% of their monthly electricity bills, confer to a PTI Report cited in India Today. The only costs associated with a solar system will be the cost of your installation and any added electricity costs in the event that your panels do not completely offset 100% of your electricity use.
Solar is a very long lasting product with minimum system life of at least 25 years. Since these installations do not require generators or batteries, considerable expense for their maintenance is avoided. This saves not just your money but your time too.
Solar panel installation at homes are growing really fast. But do you know what type of homeowners put solar on their homes? Is it only the wealthy and those who are environmentally conscious? Or have solar panels emerged as a mass market product?
Solar power is a free and every day available source of energy. There exists a number of solar panel energy system companies as well as solar energy consultants in New York. They can easily assist you to do solar panel process and installation at homes. Today, the number of homes which use solar power are limited and mostly they come from the rich sectors of the society.
If you consult a solar panel process and installation service provider in New York as well as all over USA. The expense of solar power system installation can range from $35,000 to $250,000. But because of the technological upgrading, numerous homeowners are now able to use solar power at a very reasonable cost. Today at many places, the government monitors the solar power consumption of households and many programs were also launched to inspire other homeowners to go for solar power panel installation. For example, government is also providing rebates to households when the solar power consumption has reached a certain point.
The U.S government is offering help move solar into more diverse neighborhoods. New projects such as community solar projects, where neighborhoods buy solar energy from a shared system is becoming rapidly gaining popularity. Many solar panel installation companies and solar energy consultants in New York are providing subsidies on customers who install solar panels at home.
A lot of households have already got adapted with solar panel installation and using solar power for household equipment and many more are still counting. These numbers show that, while there is a startup cost or initial investment associated with solar panels, it’s relatively small, and is easily outweighed by the ongoing savings the panels offer.
What’s more, the federal tax credit and utility rebates typically cover a significant portion of solar panel installation and can serve to offset the cost even more. Beyond that, a solar panel system offers price predictability throughout its lifetime, and current financing options have made even the largest systems accessible to virtually all households.
Solar energy, one of the renewable sources of energy, works by seizing the sun’s energy and turning it into electricity for your home or business. Solar Panels are made up of solar cells. A solar cell made of semi-conductors like silicon is the basic unit of every solar technology which directly converts solar light energy into electricity.
How does solar energy work?
The sunlight falls on the solar panels generating DC (Direct Current)s electricity
This DC electricity is delivered into a solar inverter that converts it to AC electricity.
This AC electricity is used to power appliances in your home.
Leftover electricity is fed back into the main grid.
Firstly the sunlight shines on solar panels, usually mounted and this creates DC electricity. Each solar panel is usually a string of 60-72 solar cells string together in series on your roof. In the case of a system using a string inverter then the DC power will flow down to the inverter at which point the inverter will convert this electricity into AC power in the same voltage as is used in your house.
The inverter will then feed AC power to your circuit board and this power is available to service any electrical loads within your property. If the loads in your house are greater than the power that is being supplied by the inverter then your loads may be partly met by solar power and partly by the use of grid power. With gird connect solar power systems you have the option at any time to use either solar power, grid power, or a combination of both.
In some instances you may be generating more solar power than your total electrical loads require and in this case your solar electricity will flow back out to the grid through your meter. Usually, your utility meter needs to be changed so that it can keep a separate record of what electricity you export to the grid and what you consume from the grid.
Many environmental factors such as weather, location, time of the year may influence the amount of solar energy, but it can be harvested throughout the year.
Solar energy is the purest and most abundant renewable energy source available on earth. The U.S. has some of the world’s richest solar resources and there exists several solar panel energy system company in New York. Today’s technology allows us to harness this resource by solar panel process and installation, giving the public and commercial entities flexible ways to employ both the light and heat of the sun.
photovoltaic is a technique by which light is directly convert into electricity; concentrating solar power, which uses heat from the sun (solar power) to drive utility requirements, electric turbines, working of heating and cooling systems, which collect thermal energy to provide hot water and air conditioning.
Below are examples of innovative, low-cost ways solar energy is being used to enhance our daily lives.
Solar powered roads
The roadways in USA are heralded for their ability to generate clean energy, but they also include LED bulbs that can light roads at night and have the thermal heating capacity to melt snow during winter weather.
Tiny solar panels can now be sewed into the fabric of clothing. The wearable solar products of the past, like solar-powered watches and solar-powered calculators, have typically been made with hard plastic material. This innovative textile concept makes it possible for solar to expand into home products like window curtains and lively consumer clean tech like heated car seats.
The concepts of off-grid solar and solar plus storage have won popularity in USA and solar power system providers have taken notice. Solar storage is still a fairly expensive product but a surge in demand from solar shoppers is expected to bring more efficient and affordable batteries to market in 2018.
Solar thermal fuel (STF)
The technology and process behind STFs is comparable to a typical solar powered battery. The STF can harvest sunlight energy, store it as a charge and then release it when needed.
Solar water purifiers
As the technology behind solar purifiers continues to enhance, expect these small-sized devices to come to market with hikers and campers in mind as an ideal consumer audience.
A solar consultant is the one who is responsible for the successful execution of a solar panel process and installation project. They monitor aspects such as equipment quality measures, efficient system design and solar panel installation as well as project deadlines. There are numerous companies in New York which provides solar panel process and installation services.
Consulting in renewable energy isn’t fundamentally about specific courses, though. It is much more about learning on the job and absorbing vast amount of information quickly and meticulously, and then applying methodologies that you’ve learned for your clients. In the case of renewables, the whole industry is pretty much new and evolving, a person might be able to gather knowledge more easily than an entrenched industry.
The very first quality for a better solar consultant is to stay updated to the latest market trends. The next crucial thing a solar consultant needs to know are technical knowledge in cell or solar module manufacturing, solar PV rooftop survey, solar power plant designing and implementation. This is because when you approaches the client, you never know what question they may ask or what solution you may have to provide. Hence a thorough knowledge is required.
Being a solar consultant, one should also have knowledge in doing some financial analysis and business modelling. A good consultant should be able to scrutinize the problem and give a complete solution in the specific time frame. Also a good solar consultant must possess good communication skills, presentation skills, networking skills etc. An efficient solar consultant must be able to handle the following scenarios.
Feasibility Study- A solar consultant should be able to assess current and future energy requirement of the consumer, cost-benefit analysis of adopting solar energy. They should also be able to identify and compare various available options.
Detailed Engineering- Should prepare various detailed technical documents, and also need to prepare operation and maintenance plan, including use of remote monitoring and production data analysis.
Procurement & Contracting Support- Should prepare bid documents, assisting in the award of contracts and also maintain a follow up on delivery of equipment.
Project Management- Preparing project management plan and timelines and supervision of installation and commissioning activities.
The increasing cost of electricity from traditional and non-renewable sources, coupled with the reducing cost of solar panels and systems over the past several years, makes solar panel installation seem like an easy to do thing for many homeowners. Numerous companies are emerging which provides solar panel process and installation services in New York.
Solar panels usually generate their own power and hence can greatly, if not entirely, reduce your monthly electricity bill. The higher your bill, the more likely you’ll gain from switching. Installing solar panels instead of relying on a utility company can help you trim your electric bill by up to 50% per month.
When you install solar panels at your home, energy from the sun will be used to power your electricity, apart from when the sun is not present, such as during thunderstorms or at night. In such cases, regular electricity supplied through your local utility company will be used as a backup. But keep in mind one thing, using power from the sun is absolutely free so you will just have to pay for the electricity you use when the sun’s not there.
Once installed, solar panels seldom have any issues that require maintenance or repairs, so we can consider it as a one-time fee for years and years of power. In fact, most solar panel companies have warranties or service contracts with homeowners which states that they will come out and fix any issues that arise at no cost to the homeowner. Several solar energy consultants in NYC offers budget solar panel process and installation services in New York and over USA.
Many states in USA offers residents clean energy grants as well as Solar Renewable Energy Credits (SRECs) as an incentive or rebate for installing solar panels at homes. But regardless of where you live, you could be suitable to receive a tax credit for the solar panels installed at your homes. When you install solar panels, you free yourself from having to concern about how much your electric company will charge you on a monthly basis. With solar panels installed at your homes via solar power system providers in USA, you are protecting yourself from having to deal with the increasing electricity costs that will relentlessly happen within the next few years.
Sun is the ultimate natural source of energy on earth. Solar power is renewable, free, and available every day. Numerous households and businesses are arising up to the fact that solar energy is an incredible resource, and installing solar panels to capture the sun’s rays, and generate the electricity they need to power everything from light bulbs to air conditioners. And everything is awesome.
The major drawback in using solar power is that it is not consistent. In fact, it’s reliably inconsistent. As at the end of each day, the sun is going to depart, taking along with it, our capability to generate electricity from solar panels. Now think of if you could use solar power even at night? What if it is possible to store energy from solar panels so that it could be used even when the sun isn’t there? We have great news for you, it can be done. There exists a lot of solar energy consultants New York as well as many parts of USA which can provide solar panel process and installation services in New York.
The easiest and best way for homeowners to fix solar power’s energy mishap is to install a solar battery while doing solar panel installation, a battery that stores energy from solar panels during daytime, and can use this solar panel generated electricity at night time. It indeed that simple. Most of the solar power system providers in New York is providing this facility nowadays.
Solar batteries gets charged each day with electricity generated by solar panels or alternately, it can be even charged with electricity directly from the grid. These daylight hours are usually times that household equipment need electricity the least because households are lit with natural sunlight and many people are out of the house for work. During daytime, these unstored electricity generated by solar panels either get unused, or leaks back into the power grid. If you are having a solar battery, this energy gets stored and keeps your home to a fully charged house, at evening as well as at night.
With solar batteries, you can store the electricity your solar panels generated. You can also maintain the value of that electricity. Get ready, switch on to solar panel installation, and it’s time for households with rooftop solar to take their energy systems to a higher level with batteries.